
AUTOMATIC GATE REPAIRS SYDNEY
Automatic gate repairs, motor repairs, servicing & fault finding
Concept Gates repairs, fault finds and services automatic sliding gates, swing gates, gate motors and access control systems across Sydney. If your gate won't open, won't close or has stopped halfway, we'll find the fault and fix it.
✓SLIDING GATES ✓SWING GATES ✓GATE MOTORS ✓REMOTES ✓SENSORS ✓ACCESS CONTROL
AUTOMATIC GATE NOT WORKING?
Most automatic gate faults fall into a few common problems. If one of these sounds like your gate, call us for a repair.
WON'T OPEN OR WON'T CLOSE
No response from the remote, keypad or button, or the motor runs but the gate doesn't move.
GATE STUCK OPEN OR CLOSED
Stuck open and your property isn't secure, or stuck closed so you can't get the car in or out.
GATE MOTOR NOT WORKING
Motor humming without moving, or grinding, clicking or other unusual noises when the gate runs.
STOPS HALFWAY OR SLOW
Stops halfway, reverses on its own, or opens much slower than it used to.
REMOTE NOT WORKING
Remote not working, poor range, or intermittent operation where the gate only responds some of the time.
SENSOR & BOARD FAULTS
Safety sensor problems, photocell faults or control board faults that stop the gate working properly.
AUTOMATIC GATE MOTOR REPAIRS
A gate that has stopped working doesn't always need a new motor. The fault could be in the motor, control board, power supply, receiver, remote, sensors, photocells, wiring, limit settings or the gate's mechanical parts. We diagnose the fault properly before recommending a repair or a replacement.

FAULT FINDING FIRST
We test the power supply, control board, safety devices and the motor itself to pinpoint why the gate isn't working.

REPAIR WHERE IT MAKES SENSE
Many faults are fixed by repairing or replacing one part, such as a receiver, sensor, control board or worn mechanical component.

REPLACE ONLY WHEN NEEDED
If a motor is worn out or can't be repaired, we'll explain why and talk you through your options before any work goes ahead.
SLIDING GATE REPAIRS
Automatic sliding gate repairs across Sydney.
When a sliding gate won't open, won't close, stops halfway or grinds along the track, we check the whole system: motor, control board, receiver, safety sensors, gear rack, wheels and track. Then we fix the actual fault.
✓ Sliding gate motors
✓ Tracks & wheels
✓ Gear racks
✓ Safety sensors & photocells
✓ Control boards & receivers
✓ Opening & closing faults
REMOTES & ACCESS CONTROL
Sometimes the gate itself is fine and the fault is in the equipment that tells it to open and close. We fault find and repair the lot.
01
REMOTES & RECEIVERS
Remotes that have stopped working, receivers that don't respond and gates that only open from close range.
02
KEYPADS, INTERCOMS & ACCESS
Keypads, intercom integration and access control systems that no longer trigger the gate.
03
SENSORS & VEHICLE DETECTION
Safety sensors, photocells and vehicle detection that stop the gate closing or make it reverse.
RESIDENTIAL & COMMERCIAL GATE REPAIRS
We repair and service automatic gates on suitable properties across Sydney, including:
HOMES & DRIVEWAYS
Sliding and swing driveway gates, gate motors, remotes and sensors.
APARTMENT & STRATA
Car park and entry gates for apartment blocks and strata complexes.
COMMERCIAL PROPERTIES
Automatic gates for offices, shops and commercial sites.
WAREHOUSES
Heavy-duty sliding gates and gate motors on industrial and warehouse sites.
CAR PARKS
Entry and exit gates, access control and safety devices for car parks.
BUSINESS PREMISES
Yard, depot and business entry gates kept secure and working.
WHY CHOOSE CONCEPT GATES
Automatic gates are our trade. Homeowners, strata managers and businesses across Sydney call us when their gate stops working.
AUTOMATIC GATE SPECIALISTS
20 years in gate automation. We supply, install, service and repair automatic gates ourselves.
PROPER FAULT FINDING
We find the actual cause before recommending anything, so you only pay to fix what is wrong.
MOTORS & ACCESS CONTROL
Sliding and swing gate motors from Key Automation, Centsys, BFT, FAAC and CAME, plus remotes and access control.
SLIDING & SWING GATES
Repairs and servicing for sliding gates and swing gates, from single driveway gates to larger systems.
RESIDENTIAL & COMMERCIAL
Homes, strata complexes, commercial and industrial sites. Fully insured.
SYDNEY GATE SERVICE
Local gate technicians servicing and repairing automatic gates across Sydney.
OUR AUTOMATIC GATE REPAIR WORK
Recent automatic gate repair and servicing jobs completed by the Concept Gates team.
WHAT OUR CUSTOMERS SAY
Reviews from our customers across Sydney.
★★★★★
"Called Concept Gates at 5pm and they came the next day by 12pm. Abraham was very professional and knowledgeable as to what was wrong with our gate. He gave us 2 options and completed the job within a hour. The gate now works better than when we had it installed by someone else. Highly recommend!"
- Karen Porch, Google review
★★★★★
"Genuinely great experience. Arrived at agreed time, clearly explained works to be done and pricing. Recommended options. Highly recommend."
- Dan, Google review
★★★★★
"Just had my gates installed. Gates and installation a very good price and quality. Can't complain about a 4 week turnaround for custom gates (from phone to final instal)."
- Vait Dyrmaier, Google review
AUTOMATIC GATE REPAIRS ACROSS SYDNEY
Concept Gates provides automatic gate repairs, gate motor repairs and servicing across our Sydney service area.
AREAS WE SERVICE
[Add the suburbs and areas targeted in your Google Ads campaign]
NOT SURE IF WE COVER YOU?
Call 0468 775 066 and ask. We'll tell you whether your suburb is in our service area.
REPAIRS & SERVICING
Automatic gate repairs, gate motor repairs, fault finding and servicing for residential and commercial gates.
AUTOMATIC GATE REPAIR FAQS
Answers to the questions we hear most from people whose gate has stopped working.
WHY WON'T MY GATE OPEN OR CLOSE?
Common causes include a power supply problem, a blocked or faulty safety sensor, a remote or receiver fault, or a motor or control board issue. Testing the system tells us which one.
DO YOU REPAIR GATE MOTORS?
Yes. We fault find and repair gate motors. Many motor faults come down to one component, so we diagnose first and only recommend a replacement when a repair isn't practical.
WHY DOES MY GATE STOP HALFWAY OR REVERSE?
Usually a safety sensor or photocell detecting an obstruction, incorrect limit or force settings, a remote or receiver fault, or a mechanical problem such as worn wheels, tracks or hinges.
WHY ISN'T MY REMOTE WORKING?
It could be a flat battery, a remote that has lost its programming, or a receiver fault. We test the remote and receiver, then repair or reprogram as needed.
DO YOU REPAIR SLIDING & SWING GATES?
Yes. We repair automatic sliding gates and swing gates, including motors, tracks, wheels, hinges, sensors and control equipment.
DO YOU SERVICE AUTOMATIC GATES?
Yes. We service residential and commercial automatic gates, checking operation, safety devices and wear before they cause a breakdown.









